Name
Quantity
A
Accessory box
1
B
Front fender
1
C
Side stand
1
Spring
1
Bolt
1
Nut
1
Spacer
1
D
Front wheel
1
Name
Quantity
E
Handlebar foam & padding cover
1
F
Cable tie
2
G
User’s manual
1
H
Spark plug sleeve
1
6. Remove the wire fixing the vehicle and the
iron frame.
7. Use tool
①⑧
to remove the clamps and the fixed
iron pipe, then install the handlebar locking
clamps. the distance between the two ends of the
mark is close, tighten evenly, first start by hand
tightening all four clamp bolts. (Torque
requirement is 25-30N.m).
8. Take out E from the accessory box and
install it as shown above.
9. Use tool
⑩
to unscrew the fixing screws of the
headlight bracket like above, then install the
headlight and tighten the screws.
