Installation and User’s Guide
CellSet MC/GPS2
Document part number 65322R0
Kennedy Technology Group, Inc.
614 Ridgeway, Rose Hill, Kansas 67133 USA
voice 316.776.1111
fax 316.776.9035
email:[email protected]
www.cellset.com
Thank you for purchasing our product!
We hope that your new
CellSet
gives you many hours of clear and comfortable operation.
This
CellSet
was designed to connect to a variety of multifunction GPS/MP3/Cellphone Devices, and bike
intercoms and auxiliary audio input systems. It allows the user to switch the GPS’ device audio to either the bike’s
intercom or auxiliary audio system.
This
CellSet
must be used in conjunction with:
• KTG Type 2 Intercom Harness
• KTG Device Harness
• KTG Aux Audio Harness or KTG Audio Switcher (e.g. AuxSwitchSet, SingleAuxADSet, etc.)
• KTG Power Harness
• Simple Switch Assembly or Timer Switch Assembly.
Each of these KTG harnesses and assemblies are sold and packaged separately.
INSTALLATION
Connect
CellSet
male plug P1 to the Power Harness you purchased.
Connect
CellSet
female jacks
J1, J4 and J3
to the Device Harness you purchased.
Connect
CellSet’s
jack
J5
to the Intercom Harness you purchased.
Connect
CellSet’s
jack
J2
to the Simple Switch or Timer Switch Assembly you purchased.
Finally, connect
CellSet’s
plug
P2
to either the Aux Audio Harness you purchased or the Kennedy Audio Switcher
assembly’s mating connector.
Refer to the instructions sheets provided with the Harness and Switch assemblies: Complete those installations.
A B A B A B H M L
P1
J1
J2
P2
J4
J5
J3
