Kaycee AVIJECTOR, Инструкция по эксплуатации и техническому обслуживанию

Страница: 3 / 12

a
Remove handgrip with an anticlockwise turn and
set aside.
s
DO NOT BOIL HANDGRIP
b Place syringe in distilled or previously boiled water
and pump trigger several times to fill syringe.
Add all other items for sterilising eg Hypodermic
needles, vaccine feed tube, feed needle or Multifit
Direct Bottlemount or Cap assembly and bottle
(unscrew bottle from cap).
c
Boil for 10 minutes.
d
Allow to cool, refit handle and pump out water.
1. Sterilisation
2. Setting the dose
In order to set the Avijector to the dose required,
fit the piston crosshead in the keyhole dose slot
(0.25/0.5/1.0ml) of your choice on the side arm
- you will need to remove the handgrip to access
this, and then push firmly on the base of the piston
up against its mainspring.