5|
Insert Rudder Stock assembly and tighten
bolts as required to achieve minimum
resistance.
6|
Take rubberised SUP handle/Tiller arm and
connect to Rudder Stock.
7|
Fit Seat Splash Guard loosely to underside of
mesh seat and allow for stretch when
tightening mesh seat to frame.
8|
Lay mesh seat on seat frame with colour
coordinated stripe facing up/splash guard
underneath.
9|
Loosely fasten side mesh seat straps
ensuring mesh is central on seat frame then
tighten fully. Flip frame over onto reverse
side then fasten tight all remaining seat
straps.
Note: We recommend sitting at 45 degrees
when Sailing the Cougar.
Содержание PUMA
Страница 1: ...PUMA COUGAR ASSEMBLY INSTRUCTIONS...
