Kaya Instruments KY-CL2F-D, Руководство пользователя

Страница: 21 / 31

Camera Link Range Extender over Fiber User Manual 20
6.2.2 KY-CL2F-D Device Unit configuration
Command Description
firmware Sets the system to firmware update mode. See 6.3 chapter for firmware update
information
status Prints the system and link status and general information
default Reset user settings
Save Save user settings to flash
Table 5 : Terminal commands for Device unit
NOTE: The commands are not case sensitive.
6.2.3 KY-CL2F-H Host Unit configuration
In order to format the system, choose the required command sequence:
Command Description Available options
format
mode
1- Base mode
2- Medium mode
3- Full mode
4- Deca10(8Taps) mode
5- Deca8(10Taps) mode
type
1- AreaScan
2- LineScan
uartbaud
port
0-CameraLink
1-RS232_0
2-RS232_1
3-RS422
baud
0-9600
1-19200
2-38400
3-57600
4-115200
5-230400
6-460800
7-921600
Table 6 : Host unit configuration
Configuration example:
Setting serial port CameraLink Uart baud rate 9600, Deca8 mode area scan.
To configure the host to the described mode, follow the commands:
a. uartbaud 0 0
b. format 5
Firmware