High Speed Camera Quick Start Guide
12
Figure 7 : JetCam description parameters
6.3
Starting and controlling acquisition
After JetCam camera was detected, the stream acquisition can commence.
In order to start the acquisition, press the
button, located in the main toolbar. At this point the
picture window will open, showing the current stream parameters in the bottom of the window, and
the stream will commence. An example is shown in
To stop the acquisition, press the
button located in the main toolbar or the picture window.
Acquisition can also be controlled from “Device Control” located in window menu and “Acquisition
Control” category, located in the “Camera” tab.
Using JetCam Camera
