High Speed Camera Quick Start Guide
9
5.3
QSFP+ installation and connectivity
1.
Before connecting the QSFP+ module, make sure there is no dirt inside the QSFP+ module,
or any other foreign matter blocking any of the connectors.
2.
Make sure that the male connectors on the QSFP+ module will align with the female
connectors inside the cage.
3.
Insert the QSFP+ modules into the
JetCam Camera
and
Komodo Fiber board
.
4.
Insert the fiber cables into the QSFP+ modules as described in Figure 2 and Figure 3.
For detailed information about QSFP+ installation please refer to JetCam User Guide documentation.
5.4
JetCam installation and connectivity
Connect the Power Adaptor to the
JetCam
power supply connector as shown in Figure 4.
NC GND
Power
Connector
SDI Connector
Serial
Connector
GPIO
Connector
QSFP+
Connector
12V
Figure 4 : JetCam camera power connector
Figure 2 : QSFP+ Module
Figure 3 : QSFP+ Module with
fiber cable inserted
Installation and Connectivity
