Page no. 3 | Appendix No. 1
3
Introduction
3.1
Safety Precautions
With your
Iron
camera in hand, please take the time to read through the precautions listed below in order to
prevent preventable and unnecessary injuries and damage to you, other personnel or property. Read these safety
instructions carefully prior to your first use of the product, as these precautions contain safety instructions that
must be observed. After reading through this manual, be sure to follow it to prevent misuse of product.
Caution! Read Carefully and do not disregard these instructions.
In the event of a failure, disconnect the power supply
Disconnect the power supply immediately and contact our sales personnel for repair. Continuing to use the product in
this state may result in a fire or electric shock.
If an unpleasant smell or smoking occurs, disconnect the power supply.
Disconnect the power supply immediately! Continuing to use the product in this state may result in a fire or electric
shock. After verifying that no smoking is observed, contact our sales personnel for repair.
Do not disassemble, repair or modify the product.
This may result in a fire or electric shock due to a circuit shortage or heat generation. Contact our sales personnel prior
to inspection, modification or repair.
Do not place the product on unstable surfaces.
Otherwise, it may drop or fall, resulting in injury to persons or the camera.
Do not use the product if dropped or damaged.
Otherwise, a fire or electric shock may occur.
Do not touch the product with metallic objects.
Otherwise, a fire or electric shock may occur.
Do not place the product in dusty or humid environments, nor where water may splash.
Otherwise, a fire or electric shock may occur.
Do not wet the product or touch it with wet hands.
Otherwise, the product may fail or it may cause a fire, smoking or electric shock.
Do not touch the gold-plated sections of the connectors on the product.
Otherwise, the surface of the connector may be contaminated by sweat or skin-oil, resulting in contact failure of a
connector, malfunction, fire or electric shock due to static electricity discharge.
Do not use or place the product in the following locations.
Unventilated areas such as closets or bookshelves.
Near oils, smoke or steam.
Next to heat sources.
A closed (and not running) car where the temperature becomes high.
Static electricity replete locations
Near water or chemicals.
Otherwise, a fire, electric shock, accident or deformation may occur due to a short circuit or heat generation.
Do not place heavy objects on the product.
Otherwise, the product may be damaged.
Be sure to discharge static electricity from body before touching any sensitive electronic components.
The electronic circuits in your computer and the circuits on the
Iron
camera and the
Predator II
board are sensitive to
static electricity and surges. Improper handling may seriously damage the circuits. In addition, do not let your clothing
come in contact with the circuit boards or components. Otherwise, the product may be damaged.
