―
8
―
●Do not apply impact on the devices, or tilt over. There is a risk of damage.
●Prepare a spare blower in case the blower stop working. Equipment may stop working.
●Screw the companion flange into the piping after removed from the blower. There is a risk of damage.
●Do not place objects or people on top of the device. There is a risk of injuries or damage to equipments.
●Please install a warning buzzer or the like in case of a malfunction so that you can check the situation.
If a malfunction occurs, it may lead to a serious accident before you know it.
●Install in the place of altitude 1,000m or less. It may result failure and risk of cannot function
properly.
●Tighten certainly in the screw part of piping using seal adhesive. Failure to observe this could
result in air leaks.
●Always clean the area before starting installation or inspection, etc. There is a risk of injuries
from slipping or tripping, etc.
●Please install the piping as below. There is risk of cannot function properly.
・As short as possible, reduce bending points.
●Do not install in location where there are obstacles that may obstruct ventilation for motor cooling.
It may cause damage, burnout, or fire.
●When installing a terminal box cover, be careful not to get your fingers caught.
Failure to do so may cause injuries to fingers.
●When unpacking, be careful of needles and staples. There is a risk of injuries.
●Do not cover the product with the plastic bag from the packaging. There is a risk of suffocation.
４．１ Installation
１．Select the location below for installation.
・ Flat and strong place with no irregularities.
(Place with external vibration acceleration about 6.9 m/s (0.7G) or less).
・ Well ventilation location, not exposed to direct sunlight and any liquid.
・ The place that the ambient temperature around motor does not exceed 40℃.
・ The place that you can clearly read the product nameplate.
(Do not remove the nameplate)
・ The space required for maintenance and inspection.
(Install the product 30mm or more away from walls and
ceiling.)
(Please open one side.)
２．Wear appropriate protective equipment such as helmets and
gloves when working.
３．When transporting the blower by hanging it, attach the hook to
the eye bolt on the main body, or use a nylon sling.
Be careful not to injure yourself when carrying by hand.
!
CAUTION
