Page
31
3
SONG RECORDER
Step 2
Release the REC button.
The LED indicators for the selected PIANO1 and BASS buttons will
stop flashing, and the LED indicator for the REC button will start to
fl ash. This is the standby state for recording.
The LED indicator for the SOUND SELECTION button will also turn on, indicating that the sound to be used for
recording can be changed.
Step 3
Play the piano.
The recorder will automatically start recording with the fi rst key played.
The LED indicators for the PLAY/STOP and REC buttons will turn on.
Any changes made to the sound while recording will also be recorded.
While recording PART2, the previously recorded PART1 will also be played.
The recording can also be started by pressing the PLAY/STOP button
instead of pressing a key, allowing PART2 to be recorded later in the
song.
Step 4
Press the PLAY/STOP button to fi nish recording.
The LED indicators for the REC and PLAY/STOP buttons will fl ash briefl y as the newly recorded part is saved to
memory.
Saving may take a few moments. During this time, the ES6 digital piano will not respond to any other operations.
The total recording capacity of the ES6 piano’s memory is approximately 60,000 notes, with button and pedal presses
also counted as one note. When the maximum capacity is reached, recording will stop and all music recorded up until
that point will be saved to memory automatically.
ES6̲EN.indd 31
2008/06/12 11:14:12
