Kawai Concert Performer CP136, Руководство пользователя

Страница: 17 / 244

Basic Controls
9
Basic Controls
This chapter discusses the basic operations that are used to play
the Concert Performer, such as sound selection, Part configuration
and effect settings.
Selecting a Part to Play
When the CP’s main play screen is displayed (For example, when the CP is first turned on), you
are presented with four sound Parts that can be played from the keyboard. These four Parts are
named LEFT/SPLIT, RIGHT 1, RIGHT 2, and SOLO, and each one has an instrument sound assigned
to it. You can selectively turn on/off any combination of these four Parts, allowing you to have up
to four different sounds at the same time across the keyboard.
Sound assigned to Parts RIGHT 1 and RIGHT 2 will be layered on top of each other when both
parts are active at the same time. When the SOLO part is activated, the sound assigned to the Solo
Part will be layered with the RIGHT 1 and RIGHT 2 Parts. The SOLO part can also be set to split
the keyboard so that the sound assigned to the SOLO Part is only heard when you play above a
specified key (split point) on the keyboard. See “Solo Settings” on page 141 for details.
Activating the LEFT/SPLIT Part automatically splits the keyboard so that the sound assigned to
the LEFT/SPLIT Part is only heard when you play below a specified key (split point). Each Part has
a dedicated button on the front panel that selects and turns on/off that Part. You can Also select a
Part by pressing the appropriate L or R button.