Kawai Concert Artist CA95, Руководство пользователя

Страница: 123 / 136

123
Ap
p
e
n
d
ix
Jack Panel
„ LINE IN jacks (1/4” phone jack)
These jacks are used to connect a pair of stereo outputs from
other electronic instruments or audio equipment to the CA95/
CA65 digital piano’s speakers. The input level signal from these
jacks can be adjusted using the LEVEL knob, or by adjusting the
volume of the connected device.
To connect a device in mono, connect the cable to the L/MONO
jack only. The CA95 also allows the LINE IN audio to be mixed
with a recorded MP3/WAV file.
* The ‘Line In Level’ setting can also be used to adjust the level of the LINE
IN signal (CA95 only). Please refer to page 67 for more information.
„ USB to Host port (‘B’ type)
This USB port is used to connect the CA95/CA65 digital piano to
a computer using an inexpensive USB cable. When connected,
the instrument can be used as a standard MIDI device, allowing it
to send a receive MIDI data. Connect a ‘B’ type USB connector to
the instrument, and an ‘A’ type USB connector to the computer.
* Please refer to page 105 for more information about USB MIDI.
„ LINE OUT jacks (1/4” phone jack)
These jacks are used to connect the stereo output of the CA95/
CA65 digital piano’s sound to external speakers, amplifiers,
mixers, recording devices, and similar equipment.
Mono signals will be output only if a cable is connected to the
L/MONO jack.
The MASTER VOLUME slider does not affect the LINE OUT level.
* The ‘Line Out Volume’ setting can be used to adjust the level of the
LINE OUT signal. Please refer to page 68 for more information.
„
MIDI IN/OUT jacks
These jacks are used to connect the CA95/CA65 digital piano
to external MIDI devices, and also to a computer with a MIDI
interface as an alternative to the ‘USB to Host’ port.
* Please refer to page 97 for more information about MIDI.
Headphone Panel
„ PHONES jacks (1/4” phone jack)
These jacks are used to connect stereo headphones to the CA95/
CA65 digital piano. Two pairs of headphones can be connected
and used simultaneously. When a pair of headphones is
connected, sound will not be produced by the speakers.
„ USB to Device port (‘A’ type)
This USB port is used to connect a USB memory device to the
CA95/CA65 digital piano. This allows MP3/WAV audio files, and
SMF song files to be played directly. It is also possible to record
performances to MP3/WAV audio files, and save recorder songs
stored in internal memory for posterity.
„
USB device information
ƒ
It may be necessary to format the USB memory device before
it can be used with the CA95/CA65 digital piano. If so, please
refer to the USB Format function instructions on page 116.
Formatting the device will erase all data.
ƒ
Avoid removing the USB memory device while data is being
loaded or saved, files are being renamed or deleted, or the
device is being formatted.
ƒ
Other USB devices, such as computer mice, keyboards, or
battery chargers etc. cannot be used with this instrument.
ƒ
The ‘USB to Device’ functionality of the CA95/CA65 digital
piano conforms to USB2.0 Hi-Speed standards. Older USB
devices can still be used, however data transfer speed will be
limited to the maximum transfer speed of the device.
ƒ
The ‘USB to Device’ port is intended for connecting USB
memory devices, however USB floppy drive devices can also
be used to save recorder songs stored in internal memory, or
play SMF song files.