Kawai CN34, Руководство пользователя

Страница: 107 / 132

107
Ap
p
e
n
d
ix
Jack Panel
„
LINE IN jacks (1/4” phone jack)
These jacks are used to connect a pair of stereo outputs from
other electronic instruments or audio equipment to the CN34
digital piano’s speakers. To adjust the LINE IN level, please use
the volume controls on the device itself.
To connect a device in mono, connect the cable to the L/MONO
jack only.
„ USB to Host port (‘B’ type)
This USB port is used to connect the CN34 digital piano to a
computer using an inexpensive USB cable. When connected, the
instrument can be used as a standard MIDI device, allowing it to
send a receive MIDI data. Connect a ‘B’ type USB connector to
the instrument, and an ‘A’ type USB connector to the computer.
* Please refer to page 101 for more information about USB MIDI.
„
LINE OUT jacks (1/4” phone jack)
These jacks are used to connect the stereo output of the CN34
digital piano’s sound to external speakers, amplifiers, mixers,
recording devices, and similar equipment.
Mono signals will be output only if a cable is connected to the
L/MONO jack.
The MASTER VOLUME slider does not affect the LINE OUT level.
* The ‘Line Out Volume’ setting can be used to adjust the level of the
LINE OUT signal. Please refer to page 74 for more information.
„ MIDI IN/OUT jacks
These jacks are used to connect the CN34 digital piano to
external MIDI devices, and also to a computer with a MIDI
interface as an alternative to the ‘USB to Host’ port.
* Please refer to page 93 for more information about MIDI.
Headphone Panel
„ PHONES jacks (1/4” phone jack)
These jacks are used to connect stereo headphones to the CN34
digital piano. Two pairs of headphones can be connected and
used simultaneously. When a pair of headphones is connected,
sound will not be produced by the speakers.
„ USB to Device port (‘A’ type)
This USB port is used to connect a USB memory device to the
CN34 digital piano. This allows MP3/WAV audio files, and SMF
song files to be played directly. It is also possible to record
performances to MP3/WAV audio files and SMF, and save
recorder songs stored in internal memory for posterity.
„
USB device information
ƒ
The ‘USB to Device’ functionality of the CN34 digital piano
conforms to USB2.0 Hi-Speed standards. Older USB devices
can still be used, however data transfer speed will be limited
to the maximum transfer speed of the device.
ƒ
The ‘USB to Device’ port is intended for connecting USB
memory devices, however USB floppy drive devices can also
be used to save recorder songs stored in internal memory, or
play SMF song files.
ƒ
It may be necessary to format the USB memory device before
it can be used with the CN34 digital piano. If so, please refer to
the USB Format function instructions on page 67. Formatting
the device will erase all data.
ƒ
Avoid removing the USB memory device while data is being
loaded or saved, files are being renamed or deleted, or the
device is being formatted.
ƒ
Other USB devices, such as computer mice, keyboards, or
battery chargers etc. cannot be used with this instrument.