91
Ap
p
e
nd
ix
Please read these assembly instructions thoroughly before attempting to assemble the CS6 digital piano.
Please ensure that two or more people work on assembling the CS6 digital piano, especially when lifting the
main body of the instrument onto the stand in step 3.
Included parts
Before attempting to assemble the CS6 digital piano, ensure that all parts below are included.
A Phillips-head screwdriver (not included) will also be required in order to assemble the instrument.
c
Front under board x 1
d
Back board x 1
g
Screw (with flat washer and
spring washer) x 4
h
Tapping screw (long, black) x 4
f
Power cable x 1
k
Screw (short, black) x 3
a
Main body x 1
b
Side panel x 2
(left, right)
i
Tapping screw (mid, black) x 4
e
Pedal board x 1
Pedal support bolt x 1
j
Tapping screw (short, silver) x 4
l
Headphone hook set x 1
Headphone hook x 1
_?
1. Assembling the side panels
b
, pedal board, and pedal support bolt
e
Unfasten and extend the pedal connection cable attached to
the bottom of the pedal board
e
.
Insert the pedal support bolt approximately 1 cm into the
pedal board, using the hole shown in the diagram.
Attach the pedal board
e
to the left and right side panels
b
using the temporary mounting screws located on either end
of the pedal board. Ensure that the correct side panel is used
for the left and right side.
Ensure that the pedal board and side panels make close
contact, and that there are no large gaps between the
assembled parts.
Insert the four short silver tapping screws
j
into the holes
as shown, and securely fasten the pedal board to the left and
right side panels.
Temporary
mounting
screw
j
j
b
Pedal cable
Pedal support bolt hole
b
Assembly Instruction
