KaVo OP 3D Pro Скачать руководство пользователя страница 73

Страница: 73 / 117

6 Using the unit

Select same resolution and parameters as in patient scan.

NOTICE!

More detailed instructions in OP 3D Pro Quick Guide Stone model

and radiographic guide scan protocol.

6.6 Warnings and error messages

The unit responds to error situations by showing a dialog box containing an error code

and descriptive text on the touch screen.
When an error code appears on the display the unit will stop working and cannot be

operated while the error code is on the display. In less severe cases a warning message

will be displayed, leaving the unit operable.

6.6.1 Acknowledging errors

Most errors may be acknowledged by closing the dialog box the error is reported in.

Some errors require the unit to be rebooted. If such an error occurs, or if the unit fails

to operate as described in the user's manual, switch the unit off, wait a few seconds and

switch the unit on again.

6.6.2 Image transfer errors

If an image is not transferred successfully to the PC, close and then reopen the dental

imaging software and/or restart the PC. DO NOT restart the unit as this will erase

any image that is stored in the unit memory and this retrievable image will be lost. If

restarting the PC and/or restarting the dental imaging software does not allow you to

retrieve the images, contact technical support without restarting the unit.

ORTHOPANTOMOGRAPH

™

OP 3D Pro

Содержание OP 3D Pro






















































































































Результаты поиска

Содержание OP 3D Pro

Отзывы:

KaVo OP 3D Pro, Руководство пользователя, Страница: 73 / 117

Результаты поиска

Содержание OP 3D Pro

Отзывы: