KaVo EXPERTsurg LUX 1.008.3500, Инструкция по эксплуатации

Страница: 48 / 72

Instructions for use EXPERTsurg LUX REF 1.008.3500
5 Operation | 5.7 Activating the one-touch calibration
48 / 72
▶ Press the speed key on the foot control to start the rinsing function and control the
coolant flow.
▶ To terminate the rinsing function, press the back key or the pump key.
5.6.2 Program step Rinsing function
The rinsing function serves to feed liquid and to start-up the illumination on the hand-
piece. The motor is not activated during this process. The rinsing function can be
defined as an activity in the course of the program.
▶ Defining and executing program steps.
See also:
2
Examples of program step sequences (example 2)
5.7 Activating the one-touch calibration
The one-touch calibration automatically compensates for torque deviations of the mo-
tor that may be caused, e.g., by aging processes. When the handpiece is attached,
the unit detects if the handpiece runs sluggish or is defective. The one-touch calibra-
tion thus provides for a more accurate torque on the contra-angle handpiece.
Note
The handpiece must be attached for calibration.
One-touch calibration should be carried out only with KaVo surgical handpieces
with a transmission ratio of 16:1, 20:1 or 27:1.
The one-touch calibration cannot be carried out with third-party handpieces or
handpieces with different transmission ratios.
The calibration must be repeated whenever the handpiece is changed.
▶ Press the arrow keys until the one-touch calibration is highlighted.