KaVo ESTETICA E70 Vision Скачать руководство пользователя страница 45

Страница: 45 / 178

Instructions for use ESTETICA E70 Vision / E80 Vision

4 Operation | 4.1 Switching on the device

4 Operation

4.1 Switching on the device

Note

Always switch the machine off before leaving the office.

▶

Switch on the device using the main switch.

The KaVo log is illuminated on the display of the dentist element.

A melody is hears as soon as the unit has completely been started up.

4.2 Move the dentist's unit

CAUTION

Risk of injury when the dentist or assistant element is moved.

The patient or office staff may be injured or bruised.

▶

Monitor the patient and office staff when moving the dentist or assistant
element.

4.2.1 Moving the T table

CAUTION

Excessive load on the support system

The patient or treatment personnel may be injured.
The support system may be damaged.

▶

Do not exceed the permissible maximum weight (generated e.g. by instru-
ments and accessories).

▶

Do not use the swinging arm for a support!

NOTICE

Damage from overloading the dentist element.

Exceeding the maximum weight of more than 2 kg by adding handpieces, ac-
cessories, etc., can cause damage.

▶

Do not overload the dentist element!

The joints in the support arm have optional pneumatic brakes. The support arm
is difficult to move when the device is turned off.

▶

When the device is turned on, grab the dentist element by the handle and
move it.

The brakes are released. The dentist element is easy to move.

45 / 178

Содержание ESTETICA E70 Vision



















































































































































































Результаты поиска

Содержание ESTETICA E70 Vision

Отзывы:

Похожие инструкции для ESTETICA E70 Vision

Бренды по названию

Популярные бренды

KaVo ESTETICA E70 Vision, Инструкция по эксплуатации

Результаты поиска

Содержание ESTETICA E70 Vision

Отзывы:

Похожие инструкции для ESTETICA E70 Vision

Бренды по названию

Популярные бренды