KaVo ERGOcom 3, Инструкция по эксплуатации

Страница: 24 / 58

Instructions for use ERGOcom 3
5 Operation
|
5.1 Operation, general
5 Operation
5.1 Operation, general
5.1.1 Switch on ERGOcom 3
▶ Switch on main switch.
These indicator lamps appear on the status display after open-shop testing:
Note
If the device is ready for use, the current monitor image source is shown on screen.
5.1.2 Go to Standby mode
▶ Press the standby button.
The standby LED lights up (blue).
The status display and display are switched off and all device settings are retai‐
ned.
▶ Press Standby again to return to operating mode.
Note
Standby mode helps to extend the service life of the status display and screen.
5.1.3 Go to the ERGOcom 3 configuration menu
In this menu, all settings can be defined for operation of the product.
▶ Switch on main switch.
▶ Hold down the menu button for > 2 seconds.
The first menu item appears.
The ERGOcom 3 configuration menu has the following menu items:
▪ Interface/wlink
▪ Display format
▪ RF power
▪ System camera
▪ Footswitch mode
22/54