KaVo ELECTROmatic C, Инструкция по эксплуатации

Страница: 70 / 78

Instructions for use ELECTROmatic M/C and PM/PC
10 Troubleshooting
70 / 78
Malfunction Cause Remedy
Event E2 Foot control is being
actuated during start-
up.
▶ Do not press the foot control when you switch
the unit on.
Event E3 No motor attached.
▶ Connect the motor.
Event E4 Motor blocked.
▶ Relieve the motor, stop and start on foot con-
trol.
Event E5 Automatic light and
motor shut-off during
continuous operation of
the motor.
▶
Comply with defined operating mode.
Event E8 Saved data or settings
have been reset to
starting value.
▶
Confirm message and check or correct the pro-
gram settings.
▶
If error persists, notify the service engineer.
Event E12 No connection to mo-
tor.
▶
Check/restore correct connection.
▶
Replace motor cord.
▶ If error persists, notify the service engineer.
Event E14 Motor overload.
▶ Relieve the motor, stop and start on foot con-
trol.
All other events Internal system error. ▶
Turn the unit off and on.
▶
If error persists, notify the service engineer.