KaVo COMPACTtorque 636, Инструкция по эксплуатации

Страница: 13 / 26

CAUTION
Hazard from defective chucking system.
The tool can fall out and cause injury.
▶ Pull on the tool to check if the chucking system is functioning properly and
that the tool is firmly clamped. Wear gloves or a thimble to check, insert, or
remove the bits to prevent injury and infection.
▶ Forcefully press the push button with your thumb and simultaneously insert
the cutter or grinder all the way.
▶ Check that the cutter or grinder is seated by pulling on it.
5.4 Removing the milling tool or diamond grinder
WARNING
Do not press the pushbutton while the cutter or grinder is rotating.
If you press the pushbutton when the cutter or grinder is rotating, it can damage
the chucking system and cause injury.
▶ Never touch soft tissue with the head or tip since it may be hot and cause a
burn.
▶ After treatment is over, remove the cutter or grinder from the contra-angle
handpiece since injury and infection may result from putting it away when the
cutter or grinder are inserted.
CAUTION
Danger from rotating tools.
Lacerations.
▶ Do not unintentionally contact rotating tools.
▶ After the cutter or grinder has stopped rotating, press the push button with
your thumb and pull out the cutter or grinder.
Instructions for use COMPACTtorque 636 - 0.553.0810 COMPACTtorque 636C - 0.553.0830
5 Operation | 5.4 Removing the milling tool or diamond grinder
11/22