KaVo 1.008.3500, Инструкция по эксплуатации

Страница: 8 / 68

Instructions for use EXPERTsurg LUX – 1.008.3500
2 Safety | 2.4 Technical condition
8 / 68
2.4 Technical condition
If damaged, the device or components could injure patients, users and third
parties.
4
Only operate devices or components if they show no signs of damage on the
outside.
4 Check the power cable before use.
4 Connect only to sockets with a protective contact that meet the respective
national regulations.
4
Check to make sure that the device is working properly and is in satisfactory
condition before each use.
4 Have parts with sites of breakage or surface changes checked by the service
personnel.
4
Safety checks may only be performed by trained service personnel.
4
If the following defects occur, stop working and have the service personnel
carry out repair work:
▪ Malfunctions
▪ Damage
▪ Irregular running noise
▪ Excessive vibration
▪ Overheating
Careless setup/installation of the product or accessories can cause injury to pa-
tients, users and third parties. Power supplies and/or cables/hoses on the floor
can cause slipping or tripping.
4
Power supply and cable/hoses need to be set-up/routed appropriately such
that they are not on the floor.
Failure of the voltage supply or other errors can cause the surgical motor to
come to a standstill possibly leading to injury.
4
Make sure that the power supply is working.
2.5 Electromagnetic fields
Electromagnetic fields might interfere with the functions of implanted systems
(such as pacemakers).
Medical electrical devices are subject to special precautions regarding electro-
magnetic compatibility and must be installed and operated in accordance with
the tables of electromagnetic compatibility.
Also refer to:
13 Information concerning the electromagnetic compatibility according to EN
IEC 60601-1-2, Page 63
High-frequency communications devices may interfere with medical electrical
devices.
4
Ask patients if they have a cardiac pacemaker or other system implanted
and counsel them about the risks before you start the treatment.
4
Comply with the tables of electromagnetic compatibility during installation
and commissioning.
4 If the device needs to be used in the immediate vicinity of other equipment,
monitor the device or system for malfunctions.