KaVo 1.008.3500, Инструкция по эксплуатации

Страница: 31 / 68

Instructions for use EXPERTsurg LUX – 1.008.3500
5 Operation | 5.3 Surgical motor INTRA LUX S600 LED
31 / 68
View Setting
The LCD brightness determines the brightness of the
display. The brightness can be set in 3 steps ranging
from dark to maximum brightness.
The volume level determines the volume of signal
sounds.
The volume can be set in 3 steps ranging from quiet to
maximum volume.
The volume cannot be turned off.
The volume of key sounds determines the volume of
the sound made when a key is pressed.
The volume can be set in three steps or switched off.
Exporting settings
The export of device settings allows the user to export
all device settings to the SD card in a
<SURG_EX.SET> file. KaVo recommends exporting the
settings as soon as the individual basic settings have
been made.
Importing settings
The import of device settings allows the user to import
all device settings from the SD card in a
<SURG_EX.SET> file. This allows a defined status to
be restored, e.g. if settings were changed or deleted
inadvertently.
Reset the device to factory settings
Factory settings can be used to re-set the unit to its
condition at the time of delivery. All programme steps
and device settings are re-set to their default values.
4
Press the right arrow key to activate the selected
setting.
A confirmation prompt for resetting of the factory set-
tings is displayed:
4 Press the plus key to carry out the action.
4 Press the minus key or back key to discontinue the
action.
Display of software version (presently: 01.10)
5.3 Surgical motor INTRA LUX S600 LED
NOTE
Following instructions for use, service instructions and assembly instructions
in the motor, handpiece and contra-angle handpiece packaging.
Also refer to: Instructions for use INTRA LUX S600 LED