Operating Manual
Original Operating Manual
27
Models, hydraulically tilting by 180° or 90° (Figures 6.3.3 and 6.3.4):
Renew defective or leaky cylinders (26) by removing the hydraulic lines from the
cylinder (26) with the hydraulic system depressurised. Remove the circlip (21) and
split pin (30). Pull out the bolt (11) and (12) to the side and replace any defective parts
Reinstall the pins (12) and (11) using split pin (30), circlips (21) and the hydraulic
lines.
Model, mechanically rotating (Figure 6.3.5):
Renew worn sleeve bearings (1) and bearings (15) by removing the circlips (17) and
washer (18). Pull the pressure plate (20) out to the side and replace faulty parts.
Reinstall the pressure plate (20) including washer (18) and circlips (17).
6.3.6 Identification plate and caution board
Number
Description
KAUP order number
1
Identification plate
only by quality
department
2
Before putting into operation
carefully read and take note of the
operating and security instructions.
0100016401
