Kauo Heng KH-323 SERIES - V2, Руководство по эксплуатации

Страница: 19 / 55

KAUO HENG COMPUTERIZED FLAT KNITTING MACHINE
KH-323 SERIES – V2
OPERATION MANUAL 18
Left rear
Left front
Rea
r n
eed
le
bed
9. Racking mechanism
○
1
The rear bed can be racked five
（
5
）
pitches, the initial position”0”. See the
left selvedge of needle bed, the corresponding position that the first
needle of rear is on the left hand side of the first needle of front. As
shown in Fig.9.1.
○
2 In editing instruction you can choose the left racking or the right racking
by one pitch.
○
3 In each racking position the rear bed and the front bed must be kept in
correct corresponding relation. You check it with pushing one front
needle to tuck position, the hook of front needle and the knock-bit of rear
bed should be at the same position.
Fig.9.1 Initial position of needle bed
○
4 If there has racking instruction in programming, you must enter the test
mode to rack the needle bed in the set position before you execute run,
and make sure the racking mechanism is matched your programming.
☉
Needle position of transfer must be at the left –2 and at the right +3 of
needle bed.