-
-
Star/Stop:
Press "OK" key for start, press again stop. Time and capacity is accumulate, press and hold
reset the memory, or auto-reset when power off.
Discharge warning’s:
the display flick and buzzer warning when discharge stop, press any key to stop warning.
External power resistance cooling model:
when discharge process the resistance is very hot!
Please avoid touch and place in safety place.
Dimensions:
Product: 116*90*40mm, High-power resistance: 165*60*30mm
Weight:
190g, High-power resistance: 450g
key for
OPERATION:
This product can use external power, in 3-Wire mode l, if the battery voltage above 5V, do not need external
power, use 2-Wire.
Following operation guide use 2-Wire model:
1.-
Set Product wire jump to 2-Wire mode.
2.-
First wiring 1Ω/200W resistance, then wire battery to tester, positive and negative polarities wiring correct.
Notes:
please check reliable connection of the wiring, or will damage the connection terminal!!
3.-
After power on the tester will automatic work, default display voltage value, stop discharge voltage is 10.5V.
Default discharge current is 10A.
4.-
If want to change current, press
key, LED lamp "A" is flashing
Then press
and
key, to set quick discharge amp value: 1A, 2AO10A.
Press "OK" key enter quit. this is quickly setting
mode, if want to set detail amp value in step
100mA, please access the setup mode.
Notes:
If want to change stop discharge voltage, also need access setup mode.
5.-
Access setup mode: press and hold "
OK
" key, voltage LED lamp flashing, means now In setup mode. Press "
OK
" key to select different setup function:
5.1.-
Function 1 (setup battery stop discharge voltage):
Press
key and
key increase and decrease voltage value, press and
hold key can
change value quickly. When voltage precision is 10mV less than 10V setting, over 10V, for
quickly setup voltage step value is 100mV.
Digital display
Voltage
Current
ES-n
AU-n
F-00
Cr-n
LED
"V" flashing
"A" flashing
/
/
/
/
Function
1
2
3
4
5
6
Introduction
Stop discharge
voltage
Discharge
Current
Save quit
Automatic
voltage
recognition
Quickly test
time(min)
Constant
resistance
