W H E E L B L A N C E R
- 18 -
5.4 Self-correction
Self-correction can be re-corrected when the manufacturer has finished, used
for many years, replaced parts or suspected that the balance error is too large.
Select a medium tire (13 ", 14 "rims) on the spindle and enter the correct value
for this tire.
S e l f - c o r r e c t w i t h a b a l a n c e d t i r e
.
I press < F > key, and then press < C > key at the same time. The
display board displays "Cal" and "Cal" indicator lights are on and
flashing. When the indicator lights go out, let go. Press the
START button, the wheel rotates for a few seconds and then
brakes automatically.
I
I At this point, the display board displays "Add" "100". Slowly
turn the tire until the outside indicator is fully on and add a 100g
counterweight at 12 on the outside of the wheel. Then, press the
Start button, and the wheel spins for a few seconds and then
brakes automatically.
Note: select a better tire for self-correction and enter the size
correctly, otherwise the subsequent measurement value will be
inaccurate.