5
Unplug first.
Discharge static electricity prior to cleaning or replacing lamp, by touching the grid
with an insulated screwdriver.
Loosen the 3 screws on the front ( A) and open the cover (B).
Turn the lamp 45 degrees (C). Take the lamp out of the lamp-holders on both sides
(D). Insert the new lamp and turn it 45 degrees.
Close the cover and replace the 3 screws.
Control the unit carefully.
1x
2x
3x
45
0
3x
GB
Never remove the plug from the socket by pulling the cord.
Never hang the PROF-40 (GC1-40) on the cord.
Make sure that the cord does not get damaged from heat, oil or sharp objects .
The socket and plug should always be damp-proof and placed above the floor.
Always leave repairs (other than cleaning, or replacing a lamp) to your supplier.
The appliance is for indoor use only. It is not for use in barns, stables and similar
locations.
The appliance should not be used in locations where flammable vapour or explosive
dust is likely to exist.
If the supply cord of the appliance is damaged, it must only be replaced by a repair
shop.
A FEW MORE SAFETY TIPS
A
B
C
D
E
