59
Here you can use the
buttons to set the picture format to be transmitted to your TV set via HDMI
Available options: “Auto” (automatic format choice), 576p, 720p or 1080i
HDMI FORMAT
SETTINGS
Here you can use the
buttons to set whether the automatic stand-by circuit should be activated after
three hours („On“) or deactivated („Off“). When this function is activated, after three hours during which no
buttons are pressed on the receiver remote control, you will see the following display:
AUTOMATIC POWER DOWN
Unless a button on the receiver remote control is pressed within two minutes, after two minutes the receiver
will switch automatically into stand-by mode.
However you can switch the receiver back into active mode at any time by pressing the stand-by button
(
?
).
If no button is pressed, after two minutes the
receiver automatically switches itself off.
