Kathrein UFD 346 Скачать руководство пользователя

Страница: 12 / 34

Operating the Receiver

This menu is displayed

ADR – Category Selection

Button '1' : CLASSIC

Button '2' : POP

Button '3' : OLDIES

Button '4' : ROCK

Button '5' : JAZZ

Button '6' : COUNTRY

Button '7' : SPECIALITY

Button '8' : REGIONAL

Button '9' : NEWS/EVENTS

Button '0' : GENERAL

•

Use the number

buttons to select the desired category.

The receiver will switch to the next channel in this category.

The following is displayed on the screen:

Category mode

selected

Channel selection is now made with these

buttons, and no longer with the

number buttons.

Not all of the program suppliers categories will be shown in the OSD window. If the
selected category is not available, the following is displayed:

Selection

does not exist!

This selection is not possible.

•

Press this button

three

times to exit the category mode.

The following is displayed on the screen:

Category mode de-selected

Channel selection continues in the same way as before.

Volume, Balance and Tone Settings

•

Press one of these

buttons and the menu for setting the volume, bal-

ance, tone controls (highs and lows), stereo-width and pseudo-stereo is dis-
played..

>Volume:

IIIIIIIIIIIIIIIIIIIIIIIIIII...................

Balance:

.................................II..........................

Highs:

.................................II..........................

Lows:

.................................II..........................

Stereo-width:

.................................II..........................

Pseudo-stereo:

OFF

Use these

buttons or the

button to select the required menu option

and use this

to make changes.

These settings have no control over the VCR scart socket, ensuring that the re-
cording is not disturbed.

Important

The option "Stereo-width" enables you to set the width of your choice.

"Pseudo-stereo" simulates stereo, and is only valid for and therefore only select-
able with mono reception. "Pseudo-stereo" mode can be simulated, by switching a
stereo program over to mono.

The OSD window will be cleared after 3 seconds.

Содержание UFD 346



































Результаты поиска

Содержание UFD 346

Отзывы:

Похожие инструкции для UFD 346

Бренды по названию

Популярные бренды

Kathrein UFD 346, Руководство по эксплуатации

Результаты поиска

Содержание UFD 346

Отзывы:

Похожие инструкции для UFD 346

Бренды по названию

Популярные бренды