14
HDMI
Scart
TV
OPTICAL
TV
R
L
RF
INPUT
Y
Pb
Pr
47-862MHz
5V
0,5A max.
USB 2.0
Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks
of Dolby Laboratories.
LOOP
OUT
VIDEO
OFF
ON
90-240V~
50/60Hz
18W
Connect the receiver (HDMI or alternatively TV Scart socket) to the TV set using an HDMI or Scart cable
(see the connection example above).
Connecting the receiver
TV connection
Connection and Set-Up
Connect the RF IN input of the receiver to the antenna socket. Use a coaxial cable with
a standard IEC connector.
If the IEC connector is not yet fi tted to the cable, strip the insulation from the cable
as shown in the following illustration and carefully fi t the connector to the end of the
cable so that it is securely fi tted.
When fi tting the connector, make sure that no strands of the braid are touching the
inner conductor, otherwise a short circuit will occur.
The quality of the reception signal depends on a good connection at this point!
Screw on
Turn back
Slit open longitudinally (3x)
