Kathrein MSK 140/OHD Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 76

Kathrein MSK 140/OHD Скачать руководство пользователя страница 5

5 von 76

1

Preface

Dear customer,
Please follow all the information given in this manual. KATHREIN Digital Systems GmbH
has made every effort to ensure the information and descriptions are correct and com-
plete.
We reserve the right to make changes to this manual without prior notice. In particular, this
applies to changes made due to technical advancements.
We are always grateful to receive your comments and suggestions for improvement.
Prior written consent from KATHREIN Digital Systems GmbH is required for publishing,
copying, reprinting or electronically reproducing this manual or parts thereof. All product
names and trademarks in this manual are the property of the respective companies.

►

At

www.kathrein-ds.com

you can always find the current version of the software for

download.

2

Validity of Manual

This manual applies to the signal meter:

MSK 140/OHD

Order no. 2170000002

The information found in this manual is important for operating the MSK 140 and must be
observed under all circumstances.

3

Intended Use

The MSK 140 is a portable multi-standard selective signal meter designed for DVB-S/S2/
S2x, DVB-C, DVB-T/T2, analogue TV, FM radio and optical measurement input including
the return path.
Analogue and digital video signals in MPEG-2 and MPEG-4 format are displayed on a
high-resolution 9" TFT colour touch screen in the highest quality. Measurement results can
be saved on a USB stick.
The signal meter can be used both for checking antenna and cable systems as well as for
professional headends. The device is suitable for use in the lab and for monitoring head-
ends with remote control, as well as for acceptance measurements on antenna and distri-
bution systems.

«
...
3
4
5
6
7
...
»

Содержание MSK 140/OHD













































































Отзывы:

Нет отзывов