34
At the margins of the footprints of a satellite (e.g. after a slight change of position), it may be necessary for
you to manually correct the setting (not normally required). It is also possible to manually correct the fi ne
tuning.
Press the
button to switch to the main menu. The
buttons and
button allow you to call up the
submenus (“Settings”, “Antenna Confi guration”).
MANUAL CORRECTION
You can correct the inclination and horizontal angle of the antenna, and also the inclination angle of the
LNB using the “Elevation”, “Azimuth” and “Skew” settings. To do this press the
buttons or enter
a number using the numeric pad and confi rm with the
button. Check your settings by referring to the
“Signal-Strength” and “Signal-Quality” bars on the right-hand side. The higher the bar, the stronger and
better quality the signal received.
The new co-ordinates are not assigned
to the satellite until you have saved
the satellite position when exiting the
“Antenna Confi guration” menu!
When you have performed the correction, press the
button to exit the menu. You will be asked whether
you wish to save the changes.
Press one of the
buttons (“Yes, save the changes” or “No, don’t save the changes”) and confi rm by
pressing the
button.
ALIGNMENT (SATELLITE SEARCH)
Содержание MobiSet 4 digital CAP 900
Страница 1: ...Installation and operating manual Englisch MobiSet 4 digital CAP 900 ...
Страница 26: ...26 SIKAFLEX 291 DATA SHEET ...
Страница 27: ...27 SIKAFLEX 291 TECHNICAL DATASHEET ...
Страница 43: ...DECLARATION OF CONFORMITY ...