Kathrein MobiSet 2, Руководство по эксплуатации

Страница: 18 / 68

18
INSTALLATION AND CONNECTION
BRIEF INSTRUCTIONS FOR INSTALLING THE TURNTABLE
The other detailed instructions in this installation and operating manual must also be followed!
For ease of illustration, we have dismounted the BAS 60 on these photographs. As supplied, the
BAS 60 is pre-assembled to the turntable.
Determination of installation loca-
tion.
Important! System has a turning
range of 96 cm (Ø). Drill hole with
Ø 38 mm. Deburr sharp edges of
hole. Apply Sika fl ex® 291 adhesive
to the spigot of the roof gland.
Insert the spigot into the hole
and secure it from below with the
knurled nut.
Unscrew screws (x 6, 10 AF) from
the mounting plate and remove
the mounting plate. Place the turntable on prepared
wooden supports to protect the
roof of the vehicle.
The sequence of pictures shown illustrates all the necessary installation steps
that are required to install the turntable and the BAS 60 parabolic refl ector on
the roof of the vehicle.