4
Important Safety Information
WARNING
The warranty claim will expire in case of damages resulting from the
non-observance of this manual.
We do not assume any liability for consequential damages.
We do not assume any liability for damages to persons and/or
material whatsoever which result from improper handling or
noncompliance with the safety instructions. The warranty claim
will expire in such cases!
The smoke detector FRM 100 is equipped with a high-quality housing. However,
please observe the following safety instructions:
•
The housing of the smoke detector must not be opened for any reason.
Opening it is dangerous for you and others and leads to immediate loss of
warranty.
•
Operate the smoke detector only with the provided batteries.
•
Handle the smoke detector with care, heavy vibration or bumps may
damage the device.
•
Do not expose the smoke detector to direct sunlight or strong heat, e.g.
heaters.
•
Do not install the smoke detector close to strong electric power lines or
magnetic fields, as this may impair the transmission quality significantly.
•
Do not install the smoke detector directly on iron or aluminium surfaces,
as this may impair the wireless transmission significantly. Use a non-
conducting material to insulate the device from the installation surface.
•
Do not install the smoke detector in moist, very cold or very hot
environments. Please observe the maximum humidity and temperature
limits (-10 °C to +45 °C (14 °F to 113 °F), maximum 95% relative humidity).
•
Persons (including children) with limited physical, sensory or mental
abilities and/or lacking experience and/or knowledge must not use this
product.
•
Keep children away from the product and other connected electrical
appliances at all times. The smoke detector includes small parts they can
swallow. Lay cables expertly so that they are neither bent nor otherwise
damaged. Install the smoke detector out of children’s reach. Do not leave
packaging materials unattended, as they may be dangerous for playing
children.
•
Use a damp cloth to clean the alarm panel’s surface, then dry it. Cleaning
agents will damage the surface.
