4
Important Safety Information
WARNING
The warranty claim will expire in case of damages resulting from the
non-observance of this manual.
We do not assume any liability for consequential damages.
We do not assume any liability for damages to persons and/or
material whatsoever which result from improper handling or
noncompliance with the safety instructions. The warranty claim
will expire in such cases!
The glass breaking sensor FGM 100 is equipped with a high-quality housing. However,
please observe the following safety instructions:
•
Operate the glass breaking sensor only with the provided batteries.
•
Handle the glass breaking sensor with care, heavy vibration or bumps may
damage the device.
•
Do not expose the glass breaking sensor to direct sunlight or strong heat,
e.g. heaters.
•
Do not install the glass breaking sensor close to strong electric power lines
or magnetic fields, as this may impair the transmission quality significantly.
•
Do not install the glass breaking sensor directly on iron or aluminium
surfaces, as this may impair the wireless transmission significantly. Use a
non-conducting material to insulate the device from the installation
surface.
•
Do not install the glass breaking sensor in moist, very cold or very hot
environments.
•
Persons (including children) with limited physical, sensory or mental
abilities and/or lacking experience and/or knowledge must not use this
product.
•
Keep children away from the product and other connected electrical
appliances at all times. The glass breaking sensor includes small parts
they can swallow. Lay cables expertly so that they are neither bent nor
otherwise damaged. Install the glass breaking sensor out of children’s
reach. Do not leave packaging materials unattended, as they may be
dangerous for playing children.
•
Use a damp cloth to clean the glass breaking sensor’s surface, then dry it.
Cleaning agents will damage the surface.