Kathrein EXD 1532, Руководство пользователя

Страница: 16 / 24

4 / 12
If an EXD 1532 is operated alone or together with other multi-switches that bear the Kath-
rein Power Saving logo, Kathrein Power Saving can be activated by setting the rotary
switch to “ON”. This switch setting is situated to the right of the switch.
As soon as a receiver in the cascade is switched on, the LNB is powered through the end
multi-switch.
To prevent the set userband from being used or disturbed by another subscriber, it is
possible to protect the multi-switch by means of a PIN code. It is necessary to enter the
PIN code in the receiver settings. Each user band is assigned a fixed PIN code.
UB
1
UB
2
UB
3
UB
4
UB
5
UB
6
UB
7
UB
8
UB
9
UB
10
UB
11
UB
12
UB
13
UB
14
UB
15
151 052 133 124 205 196 187 178 099 232 198 111 190 002 201
UB
16
UB
17
UB
18
UB
19
UB
20
UB
21
UB
22
UB
23
UB
24
UB
25
UB
26
UB
27
UB
28
UB
29
UB
30
140 022 136 227 177 044 123 210 097 125 206 072 248 192 003
Kathrein Power Saving
Multi-switches without Kathrein Power Saving do not give signalling to the
end multi-switch. For permanent powering of the LNB, the rotary switch
must be turned to the left side.
PIN Code Protection
SAT-IF Distribution Material
Type Kathrein Power Saving Switch Setting
VWS 2551 Amplifier Unrestrictedly usable ON
EBX 2520 Two-way splitter
Unrestrictedly usable, if each trunk
is completed by the Kathrein Power
Saving-capable end multi-switch
ON
EAX 2512 Two-way splitter Not Kathrein Power Saving-capable OFF
VWS 2500 Amplifier
Devices with the order number
20510098 are Kathrein Power
Saving-capable; older models are not
ON / OFF