12 / 14
“CI” sub-menu
***
UFO331TP
***
Slot
1
--
Slot
unused
--
PMT
oaa
normal
“CI” sub-menu
***
UFO331TP
***
Slot
1
AlphaCrypt Light
PMT
oaa
normal
You can select between the CI module slot “1” display and slot “2” display by setting the slot number using the “<” or “>” key, and
by setting “1” or “2” using the “-” and “+” buttons. If a CI module is plugged into the respective slot (1 or 2), its name is displayed;
otherwise a message that the slot is empty is displayed.
“CI” sub-menu
***
UFO331TP
***
Slot
1
AlphaCrypt Light
PMT
oaa
normal
“CI” sub-menu
***
UFO331TP
***
Slot
1
AlphaCrypt Light
PMT
oaa
normal
If more than one channel is decoded using a CAM (Conditional Access Module), there are different ways by which CAMs manage
the list of these channels. If the
fi
rst parameter in the bottom line is selected using the “<” and “>” buttons, the “+” and “-” buttons can
be used to select between “Only Add Add”,
“oaa”
and “First More More Last”
“fmml”
.
The second parameter in the bottom line relates to the updating of the PMT if there have been changes to the management
information. When the “<” and “>” buttons have been selected, the “+” and “-” buttons can be used to select between “Update the
complete channel list”,
“normal”
and “List update”,
“optimised”
. Whilst practically all CAMs support the “normal” setting, there are
some CAMs that do not permit the “optimised” setting.
Note:
An inappropriate “normal” or “optimised” setting can cause loss of all encrypted channels; it may be
necessary to switch the module off and on again to recover from this.
Note:
The selection of the channels to be decoded is performed in the Channel
fi
lter menu.
If the channel
fi
lter is switched off, no decoding can be performed.
The “TP” transport stream processor is selected using the “<” and “>” buttons and the sub-menu is called up with the “Sub-menu”
button
.
The “Filter” channel
fi
lter is selected if necessary using the “<” and “>” buttons and is called up using the “Sub-menu” button
.
Main menu
A
1236
MHz
TP
27.500
MS/s
3/4
QPSK
Outp.
S21
306.00
MHz
8
MHz
QAM64
!
“Transport stream processor” sub-menu
***
UFO331TP
***
Filter
on
OID
off
00h
CI
In addition, for the indications described in “1.12 Transport stream processor: Channel
fi
lter”, if the CI retro
fi
t kit is
fi
tted a selection
facility appears in the top line at the far right. This is for decoding the module slot provided (1 or 2), and offers the following
selection options:
“-”
= No decoding
“1”
= Decoding via CAM 1
“2”
= Decoding via CAM 2
Содержание 20610100
Страница 71: ......