Kathrein 20610100, Руководство пользователя

Страница: 23 / 72

9 / 14
“Transport stream processor” sub-menu
*** UFO331TP ***
Filter off
IDs
When changing to the “Filter” sub-menu
Channel
information
is read in
....
To process the channel list for the channel fi lter, press the “Sub-menu” button on the “Filter” parameter in the channel fi lter.
This reads in the current channel table from the transponder. A progress bar appears while this is done.
As soon as the channel unit has successfully determined this information, the sub-menu for adjustment is displayed.
If a CI retro fi t kit is fi tted an additional parameter is shown in the second line, see also the next chapter.
“Filter” sub-menu
*** UFO331TP ***
T / 001 / 009
Das Erste / -
Compile
“Filter” sub-menu
*** UFO331TP ***
T / 001 / 009
Das Erste / -
Compile
The fi rst line shows the type of the channel that was selected, together with the number of the channel and the number of channels
on the transponder.
T = TV channel R = Radio channel D = Data service
Channel no. (e.g. 001) / Quantity (e.g. 009)
of the selected channel of the channels on the transponder
The second line shows the channel name, together with its fi lter status (+ or -).
The default setting for the status of the channels that are displayed is “-”, i.e. no channels are transmitted when the channel fi lter
is switched on, but the channel list is not being processed .
The “Compile” button in the third line starts the compilation of the channel list, which then becomes effective.
The selection of the channels carried over is performed using the “+” and “-” buttons, where the status “+” means the channel will
be carried over and the status “-” means it will be removed. The “Status” parameter is selected using the “<” and “>” buttons.
The settings become effective when the fi lter table is compiled. This is done using the “<” and “>” buttons; select the “Compile”
parameter and use the “+” or “-” buttons to initiate the compilation of the channel table.
Note: The channel fi lter can be edited even if it is not activated (“OFF”). This means that the operation can be checked
or temporarily deactivated without waiting times or reprogramming.
If the channel list was not processed but the channel fi lter was switched on, the previously saved list will be
active, or in the absence of any list no channels will be transmitted.
“Filter” sub-menu
*** UFO331TP ***
T / 001 / 009
Das Erste / -
Compile
On compiling the channel fi lter
Channel fi lter
being compiled
....
When Channel fi lter “on” is selected a “P” appears at the top right corner of the main menu .