5.
Install the new quad seal
(8013147) on the end of the
membrane element farthest
from the freshwater product
output (the end where the
seawater
enters
the
Membrane) (see Figure 4).
NOTE:
Only one end of the
membrane element gets a new
quad seal.
6.
Install two new O-rings (8013004) on the male end of the membrane (see Figure 4).
7.
Reassemble in the reverse order of disassembly. Be sure to lubricate all O-rings and seals with a thin
film of silicone lubricant.
The largest O-ring () in the kit is a spare for the prefilter assembly and not displayed in Figures A1-A4.
Install this O-Ring only in case of leakage.
CAUTION: Do not use petroleum-based lubricants on the O-ring.
