EN
DE
FR
NL
DK
SWE
NOR
FIN
IT
ESP
POR
FILTER CARTRIDGE CAPACITY & REPLACEMENT
Cartridge capacity depends on water quality. To extend cartridge life, use filter
protector and clean it regularly. The Katadyn Gravity Camp 6L and Base Camp
Pro 10L were tested and found effective for removal of bacteria and protozoan
cysts like Giardia and Cryptosporidium. To keep the filter cartridge performing
at a high level, it should be replaced after 1500L or if water flow has stopped
(review Field Tips to ensure best product performance).
Replacement Cartridge Installation
Replacement cartridges (Ultra Flow Filter Cartridge) are available from the dealer
where you purchased your Katadyn Gravity Camp 6L or Katadyn Base Camp Pro
10L. Both the Gravity Camp 6L and Base Camp Pro 10L will allow a Hiker Pro
Replacement Cartridge or Siphon Ceramic Microfilter Element to be used as well
(see sections in this manual for installation instructions). A manual is included in the
packaging of the Hiker Pro Replacement Cartridge or available in the download
area of www.katadyn.com.
To replace the Ultra Flow Filter Element:
1.
Remove output hose and unscrew cap. Screw the cartridge counterclockwise
to remove. Do not grasp the cartridge around the pleated surface, since it
may damage the filter.
2. Rinse the inside of water bag with clear water (non-filtered water is ok).
Discard water. Wipe inside of water bag with soft cloth to remove sediment.
3. Insert new cartridge as described in Product Set-up step 2 (See Figure 2).
KATADYN HIKER PRO REPLACEMENT CARTRIDGE COMPATIBLE
The Katadyn Hiker Pro Replacement Cartridge
(sold separately) is also compatible
with the Gravity Camp 6L or the Base Camp Pro 10L. This allows customers who
own the Hiker, Hiker Pro or old Base Camp to use the same cartridge in multiple
products. The Hiker Pro Replacement Cartridge has a carbon core which improves
WARNING
Before long-term storage, disinfect filter thoroughly to prevent growth of mold,
mildew and bacteria which could cause illness.
Do not use dishwasher or microwave to disinfect parts. Doing so will damage
or melt the parts from high heat.
