background image

HIKER PRO QUICK CONNECT HOSE FITTINGS

The Hiker Pro includes quick-connect fittings for both input and output hoses. The fittings make
hose handling quick and easy. The output hose quick-connects may also be used to connect
directly to the drink hose (1/4" diameter only) of a hydration pack or bladder allowing quick fill-
ing  without opening pack. 

Input Hose Set-up Instructions (required)

Connect black hydration connector insert to the end of input hose (opposite end of 
prefilter). Connect input hose insert to quick release body at base of pump housing. 

Output Hose Quick Connect Set Up Instructions (optional)

Option #1:

This configuration is ideal for easy removal and storage of output hose to avoid cross contami-
nation. Output hose may easily be stored inside the re-sealable bag provided.

1. Install output hose and cut hose approximately 2-4 inches from filter cartridge.

Step 1

Step 2

Installing Filter Protector

Wrap protector screen around cartridge (there will
be approximately a 2" overlap) and hold in place.
Slip the flexible netting over the cartridge. Adjust
filter protector screen and netting so they are posi-
tioned evenly.
The use of the Filter Protector will extend cartridge
life to up to 1,150 liters (300 gallons), depending
on water quality.

Cartridge

Netting

Protector Screen

HIKER PRO REMOVABLE FILTER PROTECTOR

The Filter Protector is a cleanable screen that covers the Hiker Pro cartridge. The Hiker Pro does
not require frequent cleaning, however using the Filter Protector will extend the life of your car-
tridge. It may be used continually or when source water contains suspended particulate or dirt. 

Cleaning Filter Protector

If your Hiker Pro becomes difficult to pump, clean the Filter Protector. To clean, carefully remove
the netting and Filter Protector from cartridge. Place Filter Protector on flat surface and clean with
damp sponge or fabric. Rinse with water and reinstall. It is also recommended to clean the filter
cartridge by holding it by the top and "swishing" it in water. This will remove most particles that
may have collected on the filter surface.

8018522-0 Hiker-Hiker PRO Manual EU-11-Sprachen_CONTENT_103656-Katadyn-B-da1a

Содержание 8018280 Hiker Pro









Отзывы: