PERFORMING
You can switch the click sound on and off by pressing [CLICK] button. When the
click plays at the current Time Signature and Tempo (displayed in the top left
corner of the LCD), the beat indicators will swing accordingly. You can set the
time signature and interval, adjust the click volume and select the click sound
in the CLICK menu.
1. Press the [CLICK] button.
Start the metronome with click sound.
2. Press the [PAGE] button to select the click menu pages and press the [ - ] or
[+ ] button to adjust the parameters.
3. Press the [CLICK] button again.
Stop the metronome and exit the click menu.
You may wish to adjust the sensitivity of the pads according to your playing
style and desired dynamic range.
1. Press the [UTILITY] button
The UTILITY indicator appears.
2. Strike a pad or press a pad select button to select the one whose sensi-
tivity is to be adjusted. The PAD indicator shows the current selected pad.
3. Press the [ - ] or [ + ] button to adjust the sensitivity.
4. Press the [SAVE] button to save the current setting.
For details on pad adjustments, refer to Advanced Use.
You can adjust the tempo of the Metronome, the current song, and the current
learning pattern. The current tempo always displays in the top left corner of
the LCD.
1. Press the [TEMPO] button.
2. Press the [ - ] or [ + ] button.
Adjust the current tempo.
3. Press both [ - ] and [ + ] buttons at the same time, reset the current tem-
po to its default value.
NOTE:
If there’s no operation, it will return to the previous menu page automatically
after 3 seconds.
ADJUSTING THE SENSITIVITY OF A PAD
USING THE METRONOME/CLICK FEATURE
ADJUSTING THE TEMPO