MAKING THE SETTING FOR PADS
SETTING RIM SENSITIVITY ON PADS
AUTO POWER OFF
ADJUSTING HI-HAT PEDAL SPLASH SENSITIVITY
SAVING SETTINGS OF PADS
Curve4, 5: Compared to Curve1, a soft playing produces a greater change.
Curve6: Very little dynamic response, making it easy to maintain strong vol-
ume levels. If using drum triggers, these settings help maintain stable levels
You can only set rim sensitivity on Snare, Tom1, Tom2, Tom3, Tom4. If you select
the other pads, this page will not appear.
Press the [PAGE] or [UTILITY] button, select Pad Rim Sensitivity page. The
display will show:
Same as the basic sensitivity feature, except that it relates specifically to playing
the rim.
Press the [PAGE] or [UTILITY] button to select the Auto Power Off setup page.
The LCD will display
030 and 060:
If there aren’t any operations for about 30 or 60 minutes except during playing
song, metronome, record, or MIDI in via USB port from computer and strike pads,
the module will turn the power off automatically.
“OFF”: Switch off the auto power off function.
NOTE: This parameter can be adjusted only on SNARE, TOM1, TOM2, TOM3, TOM4. If you select the other pads on this page, a
horizontal line “---” appears, and you can’t make the setting.
Press the [PAGE] or [UTILITY] button, select Pedal Splash
Sensitivity page. The display will show:
This Setting controls the sensitivity of the foot splash.
After adjusting the trigger settings (sensitivity, Threshold, crosstalk, curve,
rim sensitivity, splash sensitivity), you can save them into memory. In UTILITY
menu, press the [SAVE] button to store all pad settings.
NOTE: If you turn off the power without saving, you will lose the trigger setting
changes you have just made.
These parameters affect all kits.
