PLAYING BACK SONGS
ABOUT SONGS
SELECTING A SONG
PLAYING BACK A SONG
ADJUSTING THE ACCOMPANIMENT VOLUME
ADJUSTING THE DRUM VOLUME
MUTING THE DRUMS IN SONGS
There are 100 preset songs in the digital drum:
• 70 Looped Patterns
• 10 Looped Percussion Patterns
• 5 Hit Songs
• 15 Tap Songs
Please refer to Song List. In SONG menu, you can select the song number and
adjust the volume of the song’s accompaniment and drum part.
If the digital drum is not yet in SONG menu, press the [SONG] button to enter
it. The SONG indicator will light up, and the LCD will Display the current song
number.
Press the [ - ] or [ + ] button to select a song. When holding down [+],the song
number increase rapidly. When holding down [ - ], it decrease rapidly.
Press the [START/STOP] button to start song playback. The LCD will display the
current playing beat. Press the [START/STOP] button again, stop the song during
playback.
During song playback in SONG menu, the PAD indicators will show which pads
of the drum track is triggering. This function can be disabled or enabled by
pressing the [KICK] button while in SONG menu.
Press the [PAGE] or [SONG] button, select Song Accompaniment volume page.
The display will show:
Use the [ -1 or [+]to adjust it. It will be restore to default value on the next power
on.
Press the [PAGE] or [SONG] button, select Song Drum volume page. The display
will show:
Use the [ -1 or [+]to adjust it. It will be restore to default value on the next power
on.
Press the [DRUM OFF] button to enable and disenable the drum mute function. When DRUM OFF is
enabled, the LED will turn on.
HINT:
The sounds in the tap song are played back one by one
in sequence each time [START) is pressed or hitting
the pad which is functioned as “pad song”.
If the song number is switched while playing, the
new song won’t start until the end of the current bar.
