Watch your fingers when adjusting clamps. They may become pinched resulting in injury.
Be careful around pipe ends, inside the pipe and screw ends. Metal shavings, etc. May injure your fingers.
Before assembly, please make sure that all the items listed below are present.
Caution !
Inside This Package
Assembly
5
Assembly
6
Side Arm(L1)
Side Arm(R)
7
8
9
11
10
Side Arm( )
R
13
14
12
Center Pipe(1)
3
3
Center Pipe(2)
Tighten the screw
Tighten the screw
Tighten the screw
4
4
Tighten the screw
Center Pipe(1)
Center Pipe(2)
1
2
KT4 ASSEMBLY INSTRUCTIONS
Hi-Hat Stand
Center Pipe(1)
Center Pipe(2)
Side Arm(L1)
Side Arm(R)
[DRUM MODULE] BOX
Module
Kick Pad
[
] BOX
KICK PAD
[Hi-Hat Stand] BOX
11” Drum Pad x 4
12" Cymbal Pads x 2
14" Cymbal Padx1
[11” DRUM PADS] BOX
[14" CYMBAL PAD] BOX
[12" CYMBAL PADS] BOX
DRUM RACK
Snare pad arm(L2)
snare pad arm(L2)
1 Setting up the
[1] Attach the Center Pipe(1) to the clamp on the
pillar(L1)
[2] Attach the Center Pipe(2) to the clamp on the
pillar(L1)
[3] Attach the Center Pipe(1)(2) to the clamp on the
pillar(R1)
[4] Using the wing nut tighten the screws on the clamp.
[5] Attach the side arm (L1) to the clamp on the
pillar(L2)
[6] Tighten the screws on the clamp.
[7] Attach the side arm (R) to the clamp on the
pillar(R2)
[8] Tighten the screws on the clamp.
[9] Attach the side arm(L1) to the clamp on the
pillar(L1)
[10] Tighten the screws on the clamp.
[11] Attach the side arm(R) to the clamp on the
pillar(R1)
[12] Tighten the screws on the clamp.
[13] Attach the
(L2) to the clamp on the
pillar(L1)
[14] Tighten the screws on the clamp.
KT4 drum rack
front left vertical
front left vertical
front right vertical
back left side vertical
back right side vertical
front left vertical
front right vertical
snare pad arm
front left vertical
Pillar(L1)
Pillar(R1)
Pillar(L2)
Pillar(R2)
Pillar(L2)
Pillar(R2)
Pillar(L1)
Pillar(L2)
Pillar(R1)
Pillar(L1)
Pillar(R1)
Pillar(L1)
Setup Manual
Owner’s Manual
Drumsticks X 2
AC Adapter
Connection Cables
Hexagon Key (M5)
L-Rod of Tom3
Boom drum Arm of Tom3
ACCESSORY BOX
Boom Cymbal Arms X 3
Drum Key
Tennis ball beater
Cable Tie wraps X 8
Foot Cable for crash
Hand Screws X 2
L-Rods of Pads X 3
12" Hi-Hat
Cymbal Pad x 1
[12”
BOX
Hi-Hat]
Hi-Hat Controller
Cymbal
Cl
utch Power Cable - Y type
Hi-Hat cup
Felt
SD Card
0
5
25
75
95
100
KMC_KT4__ Setup Manual_003_150917
2015
9
17
10:13:28
