background image

Thank you, and congratulations on your choice of the TD-20K Roland Drum System.

 

TD-20K_BK.eps

 

202

 

Copyright © 2005 ROLAND CORPORATION

All rights reserved. 

No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.

Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” (p. 2) and “IMPORTANT NOTES” (p. 3). 
These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured 
that you have gained a good grasp of every feature provided by your new unit, Owner’s manual should be read in its entirety. 
The manual should be saved and kept on hand as a convenient reference.

Check the Contents of the Box

• TD-20 (Percussion Sound Module) x 1

• VH-12 (V-Hi-Hat) x 1

• KD-120 (V-Kick Trigger Pad) x 1

• PD-125 (V-Pad) x 3

• PD-105 (V-Pad) x 2

• CY-14C (V-Cymbal Crash) x 2

• CY-15R (V-Cymbal Ride) x 1

• Tuning Key x 1

• TD-20K Owner’s Manual (this manual)

* The tuning key is included in the VH-12 package.
* The TD-20 Owner’s Manual is included in the TD-20 package.
* This package does not include a kick pedal, a snare stand, and a hi-hat stand. Use with a commercially available kick pedal, snare 

stand, and hi-hat stand.

 

Owner’s Manual

TD-20K_e.book 1 ページ 2006年12月7日 木曜日 午前9時24分

Содержание TD-20K





















Отзывы: