5
4
PaCk CONTENTS - RONDa / PETRa
Familiarize yourself with the part names and confirm that the parts are included.
1 X BaTTERy BOX FOR 6XD alkalINE
BaTTERIES / 12V TRaNSFORMER
BaTTERy
VERSIONS
TRaNSFORMER
VERSIONS
1 X SOaP TaNk wITH BOTTlE SUPPORT
aND PUMP aSSEMBly
1 X ElBOw aND
CORRUgaTED TUBE
1 X wall ROSETTE
1 X BODy aSSEMBly FOR RONDa
SOaP DISPENSER
1 X BODy aSSEMBly FOR PETRa
SOaP DISPENSER
1 x teMporary
BaSe cover
1 x M 4 x 4
Set Screw
1 x M 4 x 4
Set Screw
1 x quick
connection
fitting
2 x Screw
3.5x1 1/4”
INSTallaTION - RONDa wM / PETRa wM
Step 1 – preparatION fOr INStallatION
Drill a hole (23 to 24 mm) at the desired
location for the soap dispenser spout
installation.
Drill a small hole (2 to 3 mm) just above
the previous one for the anti-rotation pin,
according to the diagram.
Remove the hexagonal nut and the disk from
the base of the soap dispenser spout.
Recommended hole size
16mm
0.63”
23-24mm
0.90-0.94”
Step 2 – INStallINg the SOap dISpeNSer
1
Insert the Soap dispenser base and
the anti-rotation pin into the holes
drilled.
Fix the base behind the wall with the
hexagonal nut and the disk.
SOAP DISPENSER bASE
DISK
ANTI-ROTATION PIN
HExAgONAL NuT
2
Fix the bottle with bottle support to
the desired location.
3
Connect the soap tube that is coming
out of the soap dispenser body to
the quick connector at the top of the
soap dispenser pump assembly by
snapping it in.
