![background image](http://html.mh-extra.com/html/kasco/waterglow-rgbc5/waterglow-rgbc5_operation-and-maintenance-manual_657142006.webp)
RGBC5 WATERGLOW LIGHTING MANUAL
5
MOUNTING INSTRUCTIONS (CONT.)
3. After attaching the unit to the float according to fountain/aerator instructions, push the clips into recess
-
es on the float until you hear an audible click indicating the fixture is secure.
4.
Repeat for remaining fixtures, spacing evenly around the float. Adjust the angle of the lights using
thumb nuts if desired. Cable ties can be used to attach the fixture cords to float, decrease play, and
ensure protection. Cable-tie the light kit power cord to the float opposite the fountain power cord for
balance and to prevent damage from the fountain.
Remember: RGBC5 fixtures MUST be properly sub
-
merged (approximately halfway) to avoid overheating.
Ensure clip is
fully seated
on float
Secure light kit power
cord to float using
supplied cable tie
Back to Contents