LEDS19 STAINLESS STEEL WATERGLOW LIGHTING MANUAL
4
MOUNTING INSTRUCTIONS
Flaps behind lens
1.
Attach the S19 bracket (F) to the light fixture (C) by using two 1/4”-20 x 1/2”’ hex screws (D) on either side
in combination with 1/4” lock washers (E). 7/16’’ wrench required. Repeat this step for all fixtures.
2.
(Optional) If you want to use one of the color choices instead of the standard soft white light, peel the
protective lining from both sides of the colored lens (B) of your choice. Place the lens inside the lens cap
(A) making sure the 3 flaps are holding the lens in place. Repeat this step for all lens caps. Continue to
Step 3.
No gap
C
F
E
D
A
Back to Contents