manualshive.com logo in svg
background image

LEDS19 STAINLESS STEEL WATERGLOW LIGHTING MANUAL

9

WARRANTY

The LED light fixtures are sealed and do not require any physical maintenance other than cleaning.

Any required repairs must be performed by Kasco Marine. Any alterations or changes made to Kasco units 

by an unauthorized source will void the warranty. This includes tampering with the unit, power cord, and/or 

control box.

A physical Kasco Repair Form must be included with any equipment sent to Kasco or an Authorized Repair 

Center. This form can be found under the Support section of 

kascomarine.com

. If no Repair Form is avail-

able, include your name and physical address for return delivery of the repaired light kit and a daytime 

phone number and/or e-mail address for correspondence regarding the warranty claim.

Visually inspect the power cord for any cuts, rodent chews, etc. to determine if it should be included in the 

repair shipment. The cord may be needed by the shop to diagnose the failure.

Once warranty coverage has been established, the equipment may be sent to any Kasco Authorized Repair 

Center or to Kasco at the address listed on the repair form. 

REPAIR

Warranty Policy

Warranty period: LED3S19, LED6S19 = 3 year Limited Warranty. Kasco® Marine, Inc. warrants this light kit 

to be free from defects in material or workmanship under normal use and service. The Kasco Marine, Inc. 

obligation under this warranty is limited to replacing or repairing free of charge any defective part within the 

warranty period from the date of shipment. Customer shall pay shipping charges for returning the unit to 

Kasco.

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND ANY OTHER OBLI

-

GATION OR LIABILITY WHATEVER ON THE PART OF KASCO MARINE, INC. AND IN NO EVENT SHALL KASCO 

MARINE, INC. BE LIABLE FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES.

Warranty is void if:

•  The light kit is not maintained properly according to the Maintenance Recommendations supplied in this 

Manual.

• 

The lights, control box, or power cord are altered in any way from original shipment. Cuts in the power 

cord are not covered under warranty.

•  The light kit is damaged by unauthorized tampering.

Warranty Claim Procedure 

The best method for establishing warranty period is by keeping your original receipt and registering the 

equipment online at 

kascomarine.com

 under the Warranty Information section.

Once warranty coverage has been established, the light kit may be sent to Kasco or any Kasco Authorized 

Repair Center for evaluation and repair.

Back to Contents

Содержание LEDS19













Отзывы: